Does helimulching after severe wildfire affect vegetation recovery in a coastal area of Northwest Spain?

Helimulching is commonly applied after high-severity wildfires in North America because of its effectiveness in reducing post-fire runoff and erosion. However, its use in other parts of the world is still very limited and information about its effects in different environments is scarce. In this study, the effects of helimulching on vegetation recovery and species composition were assessed in 70 experimental plots (80 m² each) established in five shrubland areas in Northwest Spain affected by wildfire in summer 2013. The effects on shrub, forb, fern and grass cover, and on total vegetation cover, as well as on species richness, Shannon diversity index and heterogeneity were studied over the 2 years following the fire. The impacts of soil burn severity and mulch depth on these variables were also considered. Overall, the mulching treatment had little effect on the cover variables. Although it had a positive effect on forb cover, these species represented only a small portion of the total vegetation cover. Soil burn severity was not a significant factor in explaining the variation in the variables under study. The treatment had a low impact on species composition. In the mulched plots only three non-native species were recorded and these displayed a limited capacity to act as invasive species as they were absent at the end of the period of study. The results indicate that helimulching is a feasible soil stabilization treatment with neutral effects on vegetation cover and the composition of shrubland in coastal areas of Northwest Spain.

     

Lysosomal Signaling Licenses Embryonic Stem Cell Differentiation via Inactivation of Tfe3

1. Download high-res image (175KB)
2. Download full-size image

     

Acute Complexin Knockout Abates Spontaneous and Evoked Transmitter Release

1. Download high-res image (151KB)
2. Download full-size image

     

Semi-continuous scale-down models for clone and operating parameter screening in perfusion bioreactors

Perfusion cell culture, confined traditionally to the production of fragile molecules, is currently gaining broader attention in the biomanufacturing of therapeutic proteins. The development of these processes is made difficult by the limited availability of appropriate scale-down models. This is due to the continuous operation that requires complex control and cell retention capacity. For example, the determination of an optimal perfusion and bleed rate for continuous cell culture is often performed in scale-down bioreactors and requires a substantial amount of time and effort. To increase the experimental throughput and decrease the required workload, a semi-continuous procedure, referred to as the VCD_max (viable cell density) approach, has been developed on the basis of shake tubes (ST) and deepwell plates (96-DWP). Its effectiveness has been demonstrated for 12 different CHO-K1-SV cell lines expressing an IgG1. Further, its reliability has been investigated through proper comparisons with perfusion runs in lab-scale bioreactors. It was found that the volumetric productivity and the CSPR_min (cell specific perfusion rate) determined using the ST and 96-DWP models were successfully (mostly within the experimental error) confirmed in lab-scale bioreactors, which then covered a significant scale-up from the half milliliter to the liter scale. These scale-down models are very useful to design and scale-up optimal bioreactor operating conditions as well as screening for different media and cell lines.     

Generation of intra- and interspecific Saccharomyces hybrids with improved oenological and aromatic properties

Non-wine yeasts could enhance the aroma and organoleptic profile of wines. However, compared to wine strains, they have specific intolerances to winemaking conditions. To solve this problem, we generated intra- and interspecific hybrids using a non-GMO technique (rare-mating) in which non-wine strains of S. uvarum, S. kudriavzevii and S. cerevisiae species were crossed with a wine S. cerevisiae yeast. The hybrid that inherited the wine yeast mitochondrial showed better fermentation capacities, whereas hybrids carrying the non-wine strain mitotype reduced ethanol levels and increased glycerol, 2,3-butanediol and organic acid production. Moreover, all the hybrids produced several fruity and floral aromas compared to the wine yeast: β-phenylethyl acetate, isobutyl acetate, γ-octalactone, ethyl cinnamate in both varietal wines. Sc × Sk crosses produced three- to sixfold higher polyfunctional mercaptans, 4-mercapto-4-methylpentan-2-one (4MMP) and 3-mercaptohexanol (3MH). We proposed that the exceptional 3MH release observed in an S. cerevisiae × S. kudriavzevii hybrid was due to the cleavage of the non-volatile glutathione precursor (Glt-3MH) to detoxify the cell from the presence of methylglyoxal, a compound related to the high glycerol yield reached by this hybrid. In conclusion, hybrid generation allows us to obtain aromatically improved yeasts concerning their wine parent. In addition, they reduced ethanol and increased organic acids yields, which counteracts climate change effect on grapes.     

Microfluidic devices for studying bacterial taxis,drug testing and biofilm formation

Some bacteria have coevolved to establish symbiotic or pathogenic relationships with plants, animals or humans. With human association, the bacteria can cause a variety of diseases. Thus, understanding bacterial phenotypes at the single-cell level is essential to develop beneficial applications. Traditional microbiological techniques have provided great knowledge about these organisms; however, they have also shown limitations, such as difficulties in culturing some bacteria, the heterogeneity of bacterial populations or difficulties in recreating some physical or biological conditions. Microfluidics is an emerging technique that complements current biological assays. Since microfluidics works with micrometric volumes, it allows fine-tuning control of the test conditions. Moreover, it allows the recruitment of three-dimensional (3D) conditions, in which several processes can be integrated and gradients can be generated, thus imitating physiological 3D environments. Here, we review some key microfluidic-based studies describing the effects of different microenvironmental conditions on bacterial response, biofilm formation and antimicrobial resistance. For this aim, we present different studies classified into six groups according to the design of the microfluidic device: (i) linear channels, (ii) mixing channels, (iii) multiple floors, (iv) porous devices, (v) topographic devices and (vi) droplet microfluidics. Hence, we highlight the potential and possibilities of using microfluidic-based technology to study bacterial phenotypes in comparison with traditional methodologies.     

Assessing proteolytic events in bioinformatic reanalysis of public secretome data from melanoma cell lines

Autocrine and paracrine signals are of paramount importance in both normal and oncogenic events and the composition of such secreted molecular signals (i.e the secretome) designate the communication status of cells. In this context, the analysis of post-translational modifications in secreted proteins may unravel biological circuits regulated by irreversible modifications such as proteolytic processing. In the present study, we have performed a bioinformatic reanalysis of public proteomics data on melanoma cell line secretomes, changing database searching parameters to allow for the identification of proteolytic events generated by active proteases. Such approach enabled the identification of proteolytic signatures which suggested active proteases and whose expression profiles might be targeted in patient tissues or liquid biopsies, as well as their cleaved substrates. Although N-terminomics approaches continue to be the method of choice for the evaluation of proteolytic signaling events in complex samples, the simple approach performed in this work resulted in the gain of biological insights derived from shotgun proteomics data.     

Extracting kinetics from single-molecule force spectroscopy: nanopore unzipping of DNA hairpins

Single-molecule force experiments provide powerful new tools to explore biomolecular interactions. Here, we describe a systematic procedure for extracting kinetic information from force-spectroscopy experiments, and apply it to nanopore unzipping of individual DNA hairpins. Two types of measurements are considered: unzipping at constant voltage, and unzipping at constant voltage-ramp speeds. We perform a global maximum-likelihood analysis of the experimental data at low-to-intermediate ramp speeds. To validate the theoretical models, we compare their predictions with two independent sets of data, collected at high ramp speeds and at constant voltage, by using a quantitative relation between the two types of measurements. Microscopic approaches based on Kramers theory of diffusive barrier crossing allow us to estimate not only intrinsic rates and transition state locations, as in the widely used phenomenological approach based on Bell's formula, but also free energies of activation. The problem of extracting unique and accurate kinetic parameters of a molecular transition is discussed in light of the apparent success of the microscopic theories in reproducing the experimental data.     

Equilibrium unfolding of the poly(glutamic acid)20 helix

The equilibrium structural ensemble of a 20-residue polyglutamic acid peptide (E(20)) was studied with FRET, circular dichroism, and molecular dynamics (MD) simulations. A FRET donor, o-aminobenzamide, and acceptor, 3-nitrotyrosine, were introduced at the N- and C-termini, respectively. Circular dichroism, steady state FRET, and time-resolved FRET measurements were employed to characterize the fraction helix and end-to-end distance under different pH conditions: pH 4 (60% alpha-helix), pH 6 (0% alpha-helix), and pH 9 (0% alpha-helix). At pH 4, the end-to-end distance was measured at 24 A and determined to be considerably less than the 31 A predicted for an alpha-helix of the same length. At pH 6 and 9, the end-to-end distance was measured at > 31 and 39 A respectively, both which are determined to be considerably greater than the 27 A predicted for a freely jointed random coil of the same length. To better understand the physical forces underlying the unusual helix-coil transition in this peptide, three theoretical MD models of E(20) were constructed: (1) a pure alpha-helix, (2) an alpha-helix with equivalent attractive intramolecular contacts, and (3) a weak alpha-helix with termini-weighted intramolecular contacts ("sticky ends"). Using MD simulations, the bent helix structure calculated from Model 3 was found to be the closest in agreement with the experimental data.     

Production of active pediocin PA-1 in Escherichia coli using a thioredoxin gene fusion expression approach: cloning, expression, purification, and characterization

Antimicrobial peptides possess cationic and amphipathic properties that allow for interactions with the membrane of living cells. Bacteriocins from lactic acid bacteria, in particular, are currently being studied for their potential use as food preservatives and for applications in health care. However, bacteriocin exploitation is often limited owing to low production yields. Gene cloning and heterologous protein or peptide production is one way to possibly achieve overexpression of bacteriocins to support biochemical studies. In this work, production of recombinant active pediocin PA-1 (PedA) was accomplished in Escherichia coli using a thioredoxin (trx) gene fusion (trx-pedA) expression approach. Trx-PedA itself did not show any biological activity, but upon cleavage by an enterokinase, biologically active pediocin PA-1 was obtained. Recombinant pediocin PA-1 characteristics (molecular mass, biological activity, physicochemical properties) were very similar to those of native pediocin PA-1. In addition, a 4- to 5-fold increase in production yield was obtained, by comparison with the PA-1 produced naturally by Pediococcus acidilactici PAC 1.0. The new production method, although not optimized, offers great potential for supporting further investigations on pediocin PA-1 and as a first-generation process for the production of pediocin PA-1 for high-value applications.